VehiLink™ MCR Series 100

GPS Features

Each Series 100 Router features an embedded 12 channel GPS receiver which simultaneously supports the transmission of NEMA, TAIP, and Link’s enhanced "L" packet formats. GPS position and sensor data can be stored and forwarded over wireless networks to a secure server for vehicle mapping and sensor status and control. GPS data is also made available over RS-232 and wired Ethernet enabling the use of off-the-shelf street mapping software on a mobile data computer and providing accurate time, position, speed, and directional information to a mobile digital video recorder.

Flexible Modem Support

The S100 Router can be configured to support up to two internal PC Card and one Mini PC Card data modems and two external RS-232 data modems. Link’s exclusive intelligent environmental and power control system extends the operating temperature range of off-the-shelf PC Card data modems down to -20°C providing investment protection through flexible modem configurations as wireless standards and pricing plans evolve. Available modem support includes:

      WiFi

• 802.11 A/B/G
• 54Mbps High Power 900MHz 802.11

      Cellular

• 1xRTT/EvDo
• GPRS
• EDGE
• iDEN

      Satellite
      Custom

S100 Router Key Features

      Wireless to Wireless Bridge and Routing
      Wireless to Wired Bridge and Routing
      Mobile IP
      Firewall, NAT and IPMAP for IP Management and Control
      Virtual Server
      DHCP Server with Static and Dynamic Leases
      DHCP Client
      Secure IPsec Tunneling
      Full RIP and OSPF Support
      PPPoe, PPTP, NTP
      Recursive DNS for Local Name Resolution
      Layer-7 filtering and shaping
      Radius Authentication for Hotspot
      Voltage and Temperature Monitoring
      Remote Configuration
      Remote Software Updates
      Custom Application Integration

Inputs & Outputs

The S100 Router features digital and analog I/O allowing for centralized monitoring and control of connected sensors and controllable devices using Link’s easy to integrate "L" packet format. The optically isolated digital inputs can be used to monitor connected sensors such as ignition and panic, and the remote controlled digital outputs can be used to control On/Off type of peripherals such as door locks and ignition disable. The analog inputs allow the remote monitoring of temperature and voltage type measurements.

      6 Optically Isolated Inputs (+6V - 30VDC)
      3 Sink to GND Outputs
      2 Pulse Sense Inputs
      2 Analog Inputs (0 - 50VDC)

Single Wire Harness Connection

Ethernet, RS-232 and digital I/O connections are made through a single wire harness for ease of installation and maintenance.

Remote Management

Built-in Web based configuration software and an intelligent embedded boot loader enables the S100 to be easily managed and updated using a remote wireless connection or a local Ethernet connection.

VehiLink™ Integrated Solutions

The Series 100 Router is a fully integrated member of the VehiLink™product family. VehiLink™ products provide completely integrated mobile and back office solutions for:

• Mobile Computing
• Secure Wireless Data Communications
• Digital Video Recording
• Live Streaming Video
• Video Archiving
• Vehicle Tracking